Special Note: All FCC issued amateur radio licenses no longer require a code test for any class of license. These notes are presented here to assist persons wishing to learn the code for their own enjoyment. Also, many of the attractions of amateur radio are enhanced by the ability to operate using Morse code. Indeed, many hams in rare foreign countries operate only using Morse code, and some exotic operating modes, such as moon-bounce communications, are much easier using Morse code as opposed to voice transmission.
Why Morse Code?
The Morse code was developed in the early 1800's in conjunction with the first land-line telegraph systems, as a means of sending messages via electrical impulses over long distances. The Morse Code is named after it's inventor, a gentleman by the name of Samuel F B Morse. The Morse code he invented was known as "American Morse". A modified version of that code is in use today by ham radio operators world-wide. This version is commonly known as "International Morse" (or sometimes, as "Continental Morse").
In the beginning days of radio, no one understood the engineering requirements necessary to construct equipment capable of sending and receiving signals using voice, so Morse code was the only means available. Morse code remains the simplest and most efficient way known to send messages via radio. It is easier to construct a Morse code transmitter and receiver than any other communications apparatus, and messages can be sent with less transmitter power than by any other method (except for ultra-complicated "spread spectum" systems, which are expensive, difficult to construct, and beyond the reach of the average experimenter). Also, Morse code signals (also known as CW, for Continuous Wave) will penetrate interference, both natural and man-made, better than most of the more complex schemes.
It is entirely possible to construct a working Amateur Radio set for only a few tens of dollars, including antenna and accessories, and (using Morse code) use it to contact stations hundreds or even thousands of miles away. In fact, an entire group of Amateur Radio enthusiasts specialize in building and using very simple, low powered stations (known as QRP, in ham radio parlance). There are thousands of QRP enthusiasts around the world.
When it comes to communicating with hams in other countries, Morse code is by far the most effective way to catch that exclusive and elusive "rare DX" operator (DX means "long distance" in ham radio parlance). A number of hams in Alaska have worked (communicated with) at least one ham operator in every possible country on Earth, with most if not all of the contacts made using CW (Morse code) transmissions. In many cases, the rare station uses only Morse code, and there is no alternative if you wish to contact them.
Because Morse code equipment is so easy to construct and operate, and because it has the capability to get messages through when other modes fail, and because it is a universal language understood by many operators around the world, the various organizations that oversee Amateur radio have recommended that Morse code skills should be a continuing part of the Amateur radio experience.
Learning the Morse code:
Learning the Morse Code is simple, easy, and fun. There are a few things to beware of (mistakes that can slow your learning) and several hints that can speed the process.
What not to do:
Perhaps the most important things to remember when starting out to learn the Morse code are the ones that can hinder the learning process:
The biggest mistake people make is to obtain a printed copy of the Morse code, which usually consists of a chart showing all the characters (letters, numerals, and punctuation marks) with the equivalent code symbol appearing as "dots" and "dashes" alongside each character, and then attempting to learn the code by using a test tone generator and a hand key, sending each character in turn. People who start out this way invariably have trouble copying the code properly! The reason is simple: If you learn the code by looking at dots and dashes, then, when you hear a character, your mind has to make a double conversion - first to translate the sound into equivalent dots and dashes as printed, then again to translate the printed character into the actual letter or numeral they represent. It may not seem that way to you, but that's what happens, and it can take months or even years to "unlearn" this bad habit.
Morse code is a language of sound, not print. Morse code does not consist of "dots"and "dashes" - it consists of combinations of short and long sounds known as "dits" and "dahs". The best way to learn the code is by listening to practice tapes (or CD's), or by using a computer to generate the code characters, or by listening to someone else sending, either over the air or in an in-person session. Learn the characters by sound alone. Don't worry if you have trouble at first. After a few practice sessions you will see that you can understand each character as it is sent (some will come to you more easily than others). Over a few days or at most 2 or 3 weeks, your skills will automatically expand to encompass this new technique. Yes, you will be slow at first. Don't worry about it - all the rest of us were too! Like anything else, smoothness, speed, and accuracy come with practice - just like learning a new sport or solving grade school arithmetic, or becoming comfortable and confident in a new job.
Don't try too hard! When learning the code, limit the time you practice to no more than 15 or 20 minutes per session. Experience has shown that people simply stop learning after this time, and all they are doing is going through the motions, without accomplishing anything. When your time is up, go and do something else for a while - read a book, watch TV, go outside and exercise, run an errand, whatever you like. You can come back to the code later, when a couple of hours (or more) have passed.
How to learn the code:
If there is any cardinal rule about learning the code, it would be to practice each and every day! Also, it is possible to try too hard! (see the note about limiting practice times, above) Even if you can only practice for a minute or two, and even if you are away from your practice equipment, practice every day, without fail. Of course, the ideal is to try to get at least 15 or 20 minutes of learning each day, but even 2 or 3 minutes is much better than none. Failing to practice every day will put your learning process back at least 2 days for every day you miss, perhaps even more! If you are away from your tape recorder, computer, or whatever else you use to learn the code, you can accomplish useful practice by sounding out letters (out loud or in your head). If you are riding in a car, and see a STOP sign, sound out the characters: dit-dit-dit (space) dah (space) dah-dah-dah (space) dit-dah-dah-dit. You can do this in any number of ways, in any number of situations. If someone overhears you and looks at you strangely, simply tell them what you are doing, and more often than not, they will be interested enough to ask you questions about ham radio. Who knows, they might decide to get their own license
When listening to the code, the best learning technique for most people turns out to be one where the individual letters are sent at a relatively fast speed, but the spaces between the letters are stretched out to allow the student (that's you) a moment to come up with the character the sound represents. The overall code speed (words per minute) is much slower than the sent character speed. This is known as the "Farnsworth"method" (after the gentleman who popularized the idea) and is almost universally in use today.
When copying the code on paper, block printing is usually easier than long-hand writing, for most people. Professional Morse Code operators use a typewriter! Don't try to separate individual words at first, just concentrate on getting each letter. If you miss a letter, don't panic - there's a lot more where that one came from. This is practice, not life or death. If you miss a letter, try putting in a mark of some sort (so you know how many you missed). Then more often than not, you can go back later and fill in the missing character(s) from context.
For example, suppose you copied the following partial words: ra_io fre_uen_y si_nal. Could go back later, look at that for a couple of minutes, fill in a few letters, and come up with: radio frequency signal? In any event, if you miss a letter (or even two or three) don't panic and waste time on the ones you miss. Move forward, copying those you do know, and eventually the blanks will start to disappear.
Code training resources:
Code training tapes: Code tapes (also including CD's) are used to teach each of the characters, including alpha, numeric, punctuation, and "prosigns". Tapes typically include some practice text, but unfortunately this is quickly memorized, and loses its usefulness. Code tapes and CDs are available directly from the ARRL, at:
www.arrl.org/catalog/index.php3?category=Licensing.
Look around the page for links to code practice tapes and CD's.
Computer code training: There a number of code training programs that use a computer. All of the computer-driven code training programs will teach individual characters, and most of them also have the ability to offer interactive training, where the computer sends a character, and the student has a short time to key in the character sent. If the answer is correct, the computer moves on to the next character. Most will also send long code messages from either built in or external text files.
Code training programs: There are several Morse Code training programs. Many are available free of charge via the internet. Of all these, 3 we have tried (and like) are:
Super Morse - this is a DOS based program, often available free of charge via the net or from a local radio club. It is often included on ham radio CD-ROM software products such as callbooks or other compilations of ham radio software. Super Morse runs in a "DOS Window" on most computers using the MS Windows operating system. (May not run on some systems that use Windows 2000 or later versions).
Morsecat - a freeware (available at no cost) Windows based Morse code learning program. The program has a few limitations, but most people find it works just fine for their purposes. Morsecat is available for free download at
To download this program, just click on the link above, and after downloading, follow the installation instructions. This program runs on Microsoft Windows versions 3.1, 95, 98SE, and XP. It may also operate on other versions of MS Windows, but not all combinations of machines and Windows O/S versions have been tested.
ARRL Morse Tutor - A professionally produced Morse Code tutor, available for purchase from the ARRL. You can learn more about this by looking it up on the ARRL web site at:
www.arrl.org/catalog/index.php3?category=Licensing,
then look down the page for "Morse Tutor Gold" software (near the bottom of the page)
MFJ Code tutor: The MFJ corporation (started by a couple of hams in Mississippi) offers a clever device called the "Morse Code Tutor". This gadget is a small box that has been set up to send code, in several formats. It can teach individual characters, simulate contacts between stations, or simply send random groups of characters. It can operate in either standard or Farnsworth modes, and will generate code at speeds between 3 and 60 WPM. You can get more information about this unit by calling MFJ direct, at: (662) 323-5869, or on the web at: www.mfjenterprises.com
On the air code practice: On the air code practice is available from the ARRL Headquarters station W1AW in Newington, CT, several times each day. Check the ARRL web site for times and transmission frequencies. The best choice of frequencies to use is usually on the 20 meter band, at 14.047.5 MHz. You can also try 7.0475, in the 40 meter band, and /or 18.0975 MHz, in the 17 meter band. Best times of day are 4 PM and 7 PM, Alaska time. The ARRL code practice changes speeds every 10 minutes or so, and goes wither from fast (35 WPM) to slow (5 WPM) or, from slow to fast, dependingon the day.
A complete schedule for the W1AW code practice sessions, including all operating frequencies and times, can be found at the following link:
The text for each session is taken from the pages of QST magazine (published by the ARRL) and is unique for each segment of each session, for the entire year (in other words, it does not repeat what it has sent previously for at least a year).
How long does it take to learn the code?
Most people who start out learning the code from "scratch" can master the code in 2 to 4 weeks, assuming they practice daily, as we recommend. Some people, who for one reason or another either have a bit of extra difficulty or fail to keep up their daily practice, seem to take a bit longer. Virtually every person is able to successfully pass their code test on the first try.
________________________________________________________________
If you have other questions about Amateur Radio in general, or specific questions about the testing program, you may send an e-mail to us. To send us an e-mail, Click here
Use the links below to learn more:
List of Volunteer Examiners by name
List of Volunteer Examiners by location
When and where can I find a testing session?
What do I need to bring to the exam session?
What happens after I pass my exam?
Where to find study materials for the written tests.
How can I become a Volunteer Examiner?
Volunteer Examiners Instruction Manual